MYWAY Metal Nuts – Wide Range, Great Value. Your China Fastener Manufacturer.
11+ Years Expertise | Professional Fastener Manufacturer | Standard & Custom Parts | DIN, ISO, ANSI Certified | Strong R&D | Ample Stock | Cost-Effective |
Professional Team | Serving 40+ Countries | Reliable Logistics
Hex Nut/Hex Nuts/Hexagonal Nut DIN934 ASME B 18.2. Brass
Hex Nut/Hex Nuts/Hexagonal Nut DIN934 ASME B 18.2. Brass
Description
Product Information
Brass Hex Nuts are manufactured from an alloy of copper and zinc. Dimensional specifications are governed by ASME B18.2.2 for finish nuts, and ASME B18.6.3 for the smaller diameter machine nuts. There are no grade markings on brass hex nuts. Brass fasteners are commonly used by electrical and communications industries, builders hardware and some marine applications. These nuts provide corrosion resistance in wet environments, offers thermal and electrical conductivity, and are nonmagnetic.
Brass Hex Nuts are used to connect both metal and wood components. They are also used in conjunction wiith brass bolts, screws, studs, threaded rod and any other brass fastener that has machine screw threads. Brass will protect against tarnishing.
Hex Nut Dimensions
| Thread Specification d | M1.6 | M2 | M2.5 | M3 | M4 | M5 | M6 | M8 | M10 | M12 | |
| P | Screw Pitch | 0.35 | 0.4 | 0.45 | 0.5 | 0.7 | 0.8 | 1 | 1.25 | 1.5 | 1.75 |
| e | Min | 3.41 | 4.32 | 5.45 | 6.01 | 7.66 | 8.79 | 11.05 | 14.38 | 17.77 | 20.03 |
| k | Max | 1.3 | 1.6 | 2 | 2.4 | 3.2 | 4.7 | 5.2 | 6.8 | 8.4 | 10.8 |
| Min | 1.05 | 1.35 | 1.75 | 2.15 | 2.9 | 4.4 | 4.9 | 6.44 | 8.04 | 10.37 | |
| s | Max | 3.2 | 4 | 5 | 5.5 | 7 | 8 | 10 | 13 | 16 | 18 |
| Min | 3.02 | 3.82 | 4.82 | 5.32 | 6.78 | 7.78 | 9.78 | 12.73 | 15.73 | 17.73 | |
Common Bolt Materials
Fasteners are fabricated from a variety of materials. These options include metals and polymers. Stainless steel offers strength and corrosion resistance. While polymer options have less strength than stainless, they are a good choice for resisting chemicals. The most common materials are:
- Stainless steel
- Alloy steel
- Low carbon steel
- Medium carbon steel
- Titanium
- Polymers, such as nylon
Finish Options
The use of heat treatments and application of various finishes, also known as “plating,” affects the look and performance of fasteners. Finishes provide material stability and protect the fasteners from corrosion and rust. Below are some common heat treatment and finish benefits:
- Zinc coating – Most common, low cost, resists corrosion and rust
- Galvanized – Superior corrosion protection, anti-seize, higher upfront investment
- Stainless – Great for humid environments, strong, ideal for electrical or mechanical uses
- Black – Adds color, provides better grip, deflects light
Our Nut Factory
MYWAY Services
MYWAY strictly complies with the requirements of the ISO9001 quality certification system, strictly controls quality, implements it at every level, and assigns responsibilities to everyone to ensure the healthy operation of the comprehensive system of design, production, sales, and after-sales service. In order to strengthen communication with users, better provide users with high-quality products, and better serve users with the brand, we have made the following commitments:
1. Products are designed and manufactured in strict accordance with standards. We produce non-standard products according to the drawings provided by customers.
2. Pre-sales service
Serving customers: product introduction, answers to technical questions, and engineering-assisted design.
3. Sales service
1). The products are based on the needs of user orders, with quality and delivery time as the premise.
2). During the use of the product, our company regularly organizes technical and quality inspection service personnel to visit and solicit feedback from users on the quality, usage status, improvement opinions and other aspects of the product, so as to further improve product quality.
4. After-sales service
1). If users have any problems or information when using our products, please report them back to the company in a timely manner so that the company can properly handle and improve them so that our products can better meet your requirements.
2). If the product does not work properly or is damaged due to quality problems during the warranty period, our company will be responsible for free repair or replacement. If the product is damaged or does not work properly due to improper use by the user, our company can provide repair services. If users need it, our company can provide users with free pre-sales and after-sales technical consultation.
.After-sales service. Users are required to fill in the product service and quality feedback information form and make appraisal opinions in order to improve the quality of MYWAY products and services.
FAQ
Q: What is the function of a nut?
A: A nut is a mechanical fastener with a threaded hole. It is attached to a bolt, screw or stud to provide a clamping force and prevent axial movement.
Q: Do screws have nuts?
A: Screws don’t need nuts, as they become secure by being tightened into the hole with a screwdriver or driver bit which fits into the drive recess. Generally speaking, screws are shorter than the width of the material they are being screwed into, so that they don’t protrude on to the other side.
Q: What is the difference between a lock nut and a hex nut?
A: The term “Lock Nut” is used to describe a nut that is designed to provide higher resistance to loosening as compared to a standard hex nut. Lock Nuts are commonly used in applications that encounter vibration or impact forces that can cause a standard nut to loosen over time.
Q: What is the difference between a square nut and a hex nut?
A: Hex nuts are easier to install and tighten than square nuts. They have six sides, whereas square nuts only have four sides. Because they have more sides, hex nuts offer more torque, which makes them easier to install and tighten. You can install hex nuts in smaller spaces.
Q: What is a DIN 934 nut?
A: Din 934 is the standard for Hexagon nuts with metric coarse and fine pitch thread – There are two product classes A (up to M16) and B (> M16) DIN stands for “Deutsches Institut für Normung”, meaning “German institute for standardisation” and is widely accepted globally, though many are not superseded by ISO standards.
Q: What is the ASTM standard for hex nuts?
A: Hex nuts (also referred to as finished hex nuts) are available in ASTM A563-A and compatible with low carbon steel bolts such as ASTM A307, ASTM F1554 grade 36, SAE grade 2, and AASHTO M183.
Q: What is DIN 936?
A: DIN 936 hex nuts are jam nuts, it has a fine thread.
Q: What is flange nut as per DIN 6923?
A: DIN 6923 ISO 4161 Serrated Flange Nut are hex nuts with non-spinning washers attached at the bottom. Below the washers are serrations which prevent them from being used with washers or on surfaces that can be scratched and help the nuts to securely fasten when vibrations are present.
Q: What is DIN 985?
A: DIN 985 Nylon Insert Hex Lock Nuts are internally machine screw threaded hex nuts that rely upon an undersized captive nylon (polyamide) washer to create the prevailing torque feature that resists rotation and, hence, loosening.
Q: What is DIN 6926?
A: Metric DIN 6926 Nylon Insert Hexagon Flange Lock Nuts have a circular washer like flange shaped base that increases the. weight bearing surface to distribute the load over a greater area when tightened The flange eliminates the need to use a washer. with the nut.
Q: What is DIN 980?
A: DIN 980 lock nuts, all metal lock nut is also known as all metal self-locking nut. There are two main locking forms:
a. This kind of nut is called 980-v type, and the common forms are as follows: end face three-point type, elliptical type, side extrusion type.
b. The nut is embedded with a metal locking plate, which can prevent loosing by the locking ring. This kind of nut is called 980-m
Material: Carbon Steel
Type: All metal prevailing Torque, Hex Nuts
Thread Size: M3 ~ M39
Surface Finish: Plain, Black, Zinc Plated, Yellow Plated, H.D.G, Chrome Plated
Class: 4, 6, 8, 10
Q: What is the din standard for square nuts?
A: Square nuts, DIN 557.
Q: What is DIN 562?
A: DIN 562 – Square thin nuts.
Q: What is DIN 929?
A: Hexagon weld nuts.Three uniform projections ensure reliable contact with the weld surface, even if it is not perfectly flat. The precision pilot accurately locates the threads in the pilot hole and prevents the nut from slipping off center during welding.
We’re professional bolt manufacturers and suppliers in China, specialized in providing high quality customized products with low price. We warmly welcome you to wholesale or buy discount bolt in stock here from our factory. Contact us for free sample.